Assessing flood mitigation,management, and enforcement using insurance data,California and the USA

Previous research found that National Flood Insurance Program (NFIP) premiums collected in some U.S. states, including California, have far exceeded damage payments. However, this finding raises the question of whether such an imbalance represents systematically good flood management or, instead, merely short-term hydrologic good luck. This study investigated patterns in flood losses on structures that pre-date and post-date the first available flood maps (“pre-Flood Insurance Rate Map [FIRM]” vs. “post-FIRM”) in California, several peer states, and nationwide. California has a larger inheritance of pre-FIRM structures than the national average, apparently reflecting development during the latter half of the 20th Century but before most Federal Emergency Management Agency (FEMA) flood maps. Pre-FIRM properties are a disproportionate cost burden on the system, and the number of pre-FIRM policies has declined over time, but only slowly. Local patterns in pre-FIRM claims suggest targeted areas for enhanced mitigation efforts, including buyouts. Conversely, we find that claims on post-FIRM policies are a reasonable metric of good floodplain management and enforcement, and California's 38% of post-FIRM policies generated just 24% of the state's NFIP claims. Local “post-FIRM claim hotspots” suggest areas to examine more closely. California continues to be a net payer into the National Flood Insurance Program, with $102 million in payouts 2009–2018 versus $2.3 billion in premiums collected, or 4.5 cents of premiums collected for every dollar of premiums. In California, its peer states, and nationwide, future management of flood risk depends on: (1) continued investment in flood control and mitigation of existing floodplain structures, and (2) prudent planning and limitations on new floodplain and coastal development.     

Extraction of Mercury from Groundwater Using Immobilized Algae

Bio-Recovery Systems, Inc. conducted a project under the Emerging Technology portion of the United States Environmental Protection Agency’s (EPAs) Superfund Innovative Technology Evaluation (SITE) Program to evaluate the ability of immobilized algae to adsorb mercury from contaminated groundwater in laboratory studies and pilot-scale field tests. Algal biomass was incorporated in a permeable polymeric matrix. The product, AlgaSORB, packed into adsorption columns, exhibited excellent flow characteristics, and functioned as a “biological” ion exchange resin. A sequence of eleven laboratory tests demonstrated the ability of this product to adsorb mercury from groundwater that contained high levels of total dissolved solids and hard water components. However, use of a single AlgaSORB preparation yielded nonrepeatable results with samples collected at different times of the year. The strategy of sequentially extracting the groundwater through two columns containing different preparations of AlgaSORB was developed and proved successful in laboratory and pilot-scale field tests. Field test results indicate that AlgaSORB could be economically competitive with ion exchange resins for removal of mercury, with the advantage that hardness and other dissolved solids do not appear to compete with heavy metals for binding capacity.     

Leaf morphoanatomy of species tolerant to excess iron and evaluation of their phytoextraction potential

Setaria parviflora (Poir.) Kerguélen and Paspalum urvillei Steudel are grasses that grow naturally in a soil with high iron contents. This study aimed to characterize morphoanatomically and histochemically the iron phytotoxicity on leaves and evaluate the phytoextraction potential of these grasses. Saplings were cultivated in hydroponic solution with and without excess Fe-EDTA. Regarding measurements taken on leaves, reduction was observed among treatments of Fe-EDTA on height values of abaxial epidermis and bundle sheath in both species. As for iron histolocalization, stronger reaction was observed in leaves of S. parviflora, in comparison with P. urvillei. Anatomical damage, such as protoplast retraction, irregular xylem, changes in cell volume, and cell collapse, and visual symptoms, like leaf bronzing, chlorosis, and necrosis, were similar in both species when exposed to excess iron; however, P. urvillei showed more severe damage. This species accumulated more iron in shoots than S. parviflora and therefore is more favorable for use in phytoextraction. The root system of both species accumulated higher iron concentrations in relation to shoots.     

The fate of nitrogen in a moderately alkaline and calcareous soil amended with biosolids and urea

The determination of nitrogen (N) based loading rates for land application of biosolids is challenging and site specific. Over loading may contribute to environmental, agricultural, or human health problems. The objective of this study was to monitor N mineralization and losses in a moderately alkaline and calcareous desert soil amended with either anaerobically digested (AN) or lime-stabilized (LS) biosolids, and irrigated with and without urea enriched water. For Experiment 1, N inputs, leaching and residuals in soil were evaluated in an open soil column system. For Experiment 2, ammonia (NH₃) emissions were evaluated in a closed soil column system. In Experiment 1, AN and LS biosolids increased soil ON (organic N) by three and two fold, respectively. Respective net N mineralization of ON from biosolids alone was 90% and 62% without urea, and 71% and 77%, respectively with added urea. Nitrogen leaching losses and residuals in amended soil did not account for all N inputs into the soil/biosolids system. In Experiment 2, NH₃ emissions were not significantly different among treated soils with or without added urea, except LS amended soil receiving urea. Ammonia losses did not account for unaccounted N in Experiment 1. We concluded that deep placement and rapid mineralization of AN biosolids promoted anaerobic soil conditions and denitrification, in addition to the high denitrification potential of desert soil. LS biosolids showed greater potential than AN biosolids for safe and beneficial land application to desert soils regardless of biosolids placement and the inclusion of N rich irrigation water.     

Tolerance to iron accumulation and its effects on mineral composition and growth of two grass species

This study aimed to assess the influence of excess iron on the capacity of accumulation of this heavy metal, mineral composition, and growth of Setaria parviflora and Paspalum urvillei. Seedlings were submitted to 0.009; 1; 2; 4; and 7 mM of Fe-EDTA. In both species there was an increase in the concentration of Fe, Zn, P, and Ca and a decrease in Mn, K, and Mg in the iron plaque. Both species accumulated more iron in roots. In the shoots, S. parviflora showed higher iron content, except at 7 mM. Iron altered the contents of Fe, Cu, K, and Mg in roots, and of Fe, Mn, Zn, N, P, K, Ca, and Mg in shoots. The two species tolerated high iron concentrations and accumulated high content of this element in both shoots and roots. The iron did not reduce their growth. Both species are indicated for studies aiming restoration of iron-contaminated areas.     

Evaluation of the optimal washing conditions for dioxin-contaminated soils from the circumference of an incinerator

 The optimal soil-washing conditions for dioxins were estimated on a soil sample from the circumference of an incinerator in Nose City, Osaka, Japan. The solvents ethanol, methanol, and acetone, together with a surfactant (100% of each) could extract 40% of the dioxins from contaminated soil at room temperature. From among these solvents, ethanol was chosen for a study on how to optimize the extraction conditions because of its low toxicity and its economic advantages. The time-course of the agitation showed that the extraction rate increased for 1 min, and thereafter the rate decreased. Therefore, the agitation time was fixed at 1 min. To estimate the effect of temperature on the extraction rate, the extraction temperature was changed. The amount of dioxins extracted was largest at the boiling point of ethanol (78.3°C), giving about 76% extraction. Furthermore, at this temperature, almost 100% of the dioxins in the contaminated soil were extracted when the ratio of water to ethanol was 20%. Received: March 6, 2002 / Accepted: September 9, 2002     

Adapting the bioblitz to meet conservation needs

When conservation strategies require new, field‐based information, practitioners must find the best ways to rapidly deliver high‐quality survey data. To address this challenge, several rapid‐assessment approaches have been developed since the early 1990s. These typically involve large areas, take many months to complete, and are not appropriate when conservation‐relevant survey data are urgently needed for a specific locale. In contrast, bioblitzes are designed for quick collection of site‐specific survey data. Although bioblitzes are commonly used to achieve educational or public‐engagement goals, conservation practitioners are increasingly using a modified bioblitz approach to generate conservation‐relevant data while simultaneously enhancing research capacity and building working partnerships focused on conservation concerns. We term these modified events expert bioblitzes. Several expert bioblitzes have taken place on lands of conservation concern in Southern California and have involved collaborative efforts of government agencies, nonprofit organizations, botanic gardens, museums, and universities. The results of expert bioblitzes directly informed on‐the‐ground conservation and decision‐making; increased capacity for rapid deployment of expert bioblitzes in the future; and fostered collaboration and communication among taxonomically and institutionally diverse experts. As research and conservation funding becomes increasingly scarce, expert bioblitzes can play an increasingly important role in biodiversity conservation.